
Add to Cart
Product Introduction
This distribution box terminates outside optical cables with up to 48 fibers; it allocates 48 adapters for connecting with max 48 drop cable pigtails, it is also suitable for using with mini splitters. The box works under both indoor and outdoor environments. It is a perfect cost-effective solution-provider in the FTTH networks.
Features:
1. This box could be used for wall-mounted applications;
2. Suit for Outdoor & Indoor.
3. Waterproof, Anti-UV, Ultra violet resistant and rainfall resistant.
4. Light weight, small cubage, small installation size, reliable sealing.
5. Could be connected FTTH Drop cables inside.
6. The base and cover of the box adopts “self-clip” &”screw-clip” two times lock method, which is better to use in outdoor for high sealing and waterproof.
Installation:Wall hanging:
1 According to the backplane mounting hole’s distance, hit 4 mounting holes on the wall, and knock the plastic expansion sleeve.
2 Fixed the box on the wall with M8 * 40 screws.
3 Position the upper end of the box into the wall hole, and then use M8 * 40 screws fix the box on the wall.
4 Check the box installation, close the door after qualified. In order to prevent rainwater from entering the box, the box should be tightened by a key column.
5 Insert the outdoor optical cable and butterfly type optic cable according to the construction requirements.
Characteristic
1). Environmental Requirement
Working temperature:-40℃~+85℃
Relative humidity:≤85%(+30℃)
Atmospheric pressure:70KPa~106Kpa
2). Main Technical Data
Insertion loss:≤0.2dB
UPC return loss:≥50dB
APC return loss:≥60dB
Life of insertion and extraction:>1000 times
3). Thunder-proof Technical Data
The grounding device is isolated with the cabinet, isolation resistance is no less than2000MΩ/500V(DC);IR≥2000MΩ/500V
The withstand voltage between grounding device and cabinet is no less than 3000V(DC)/min, no puncture,no flashover; U≥3000V
Specification
Item | Technical parameters |
Rubber-insulated Fiber Cable or Indoor Cable | |
Fiber Diameter | 125μm ( 652 & 657 ) |
Tight Buffer Diameter | 250μm & 900μm |
Tensile strength | >50 N |
Operating temperature | -40~+85℃ |
Insertion Loss | ≤0.2dB(1310nm & 1550nm) |
No.Port of transmission | 48 |